ATS Panels in Hyderabad
Automatic Transfer Switch (ATS) panels watch your incoming mains supply and, the moment it fails or drifts out of limits, switch the load over to a standby source such as a DG set or a second feeder – then switch it back when normal supply returns. No one has to run to the switchroom, and critical loads stay powered. Every panel is designed around your source ratings, built with properly interlocked switching devices and tested before it leaves our workshop.
Request Quote ›
High-Performance ATS Panels
- Automatic mains-to-standby changeover and return
- Electrical and mechanical interlocking to prevent paralleling of sources
- Microprocessor ATS controller with adjustable transfer and retransfer delays
- Motorised ACB, MCCB or contactor-based switching to suit the load
- Monitoring of under/over-voltage, phase failure and phase reversal
- Manual override and clear indication of the source in use
- Floor-standing or wall-mounted enclosures, IP-rated for the location
Role of ATS Panels in Power Continuity
Where a power cut means lost production, spoiled stock or a safety risk, relying on someone to switch over by hand is not good enough. An ATS panel makes the decision automatically: it senses a failure on the preferred supply, waits a short, adjustable delay to ignore brief dips, and transfers the load to the alternate source.
When the preferred supply comes back and stays healthy, the panel retransfers the load and, where a generator is involved, lets it run down on a cooling timer. Interlocking guarantees the two sources are never connected together, protecting both the equipment and the people who maintain it.
We size the switching devices, busbars and cabling to the full load and fault level of your installation, so the panel changes over cleanly every time – not just on the day it is commissioned.
Applications of ATS Panels Across Industries
Our ATS panels keep essential services running wherever an interruption is costly or unsafe.
- Hospitals, clinics and diagnostic centres
- Data centres, server rooms and IT parks
- Manufacturing and process plants
- Apartments, gated communities and commercial towers
- Hotels, malls and multiplexes
- Water pumping, STP and utility installations
Transfers to the standby source within seconds of a failure, with no manual intervention.
Electrical and mechanical interlocks prevent both sources from ever being connected at once.
Voltage and phase monitoring stops motors and electronics running on a faulty supply.
Faster changeover means less lost production, spoiled stock and restart effort.
Clear source indication and a manual override make routine checks and maintenance easy.
Two-source, three-source and bus-coupler schemes to suit growing installations.
Reliable. Efficient. Always On.
We do not just wire a changeover switch into a box – we engineer the transfer scheme around your sources, loads and fault levels. With quality switching devices, proven controllers and full functional testing, your standby power takes over exactly when you need it.
